CCTV monitoring system power supply assembly box composition

For the security surveillance industry, the clarity of the image and the stability of the system are undoubtedly the most critical, and people often care about the protagonist - the camera. But ignore the supporting role - power. The power supply is to provide a stable working power and effective lightning protection for the front-end equipment. A good camera is important. Choosing a good power supply is not to be neglected. With the development of the security industry, the camera's image is becoming more and more clear. The power supply is also not up to the date. Dongguan Xianchuang Security Products Co., Ltd., in line with the promotion of industry development, not innovation In principle, after two years of research and development, the CCTV monitoring system power supply assembly box was launched. Its product tenet is to continuously strive to standardize the construction of the industry.

From the above figure, we can see that the CCTV monitoring system assembly box integrates the two or three sockets, 12V power supply, general waterproof box, and lightning arrester used in the ordinary monitoring system, and reserves enough space to place the twisted pair transmitter. And optical accessories and Other accessories, this product is powerful and considerate, is the best partner for monitoring system engineering.

one. Professional design

1. Product size introduction

A section as shown in Figure 1 (high 180 * wide 140 * deep 70MM small box)

B section as shown in Figure 2 (high 280 * wide 190 * deep 70MM large box)

B+ models shown in Figure 3 (high 280*width 190*deep 95MM deepened box)

The size of the assembly box is for any project or any type of camera. Of course, it is prepared for you.

2 waterproof performance

The CCTV monitoring system assembly box is a four-side sealed design.

CCTV monitoring system has two guide channels on both sides of the assembly box.

3. Inlet and outlet

CCTV monitoring system is equipped with a large, small, two-outlet waterproof connector

The large waterproof connector can freely enter and exit the camera's BNC head.

The small waterproof connector diameter can effectively fix the power cable.

4. Installation method

CCTV monitoring system assembly box is installed with 3 fixed mounting methods

two. Advanced surface treatment for selected materials

First CCTV assembly box made of all-metal 1mm thick material, the surface with high-temperature electrostatic spray, so the use of materials, increase the chassis hardness and weight, there is a comparative advantage in the end user. Precision punching, hand-soldering using high-grade white outdoor powder drying at high temperature, will not lose paint within three to five years.

three. High quality circuit design

First consideration of CCTV assembly box is the most considerate and considerate

Switch, socket design

four. The use of this product can make the project more standardized, facilitate maintenance management, and can print the corresponding repair call or advertisement according to customer requirements.

With the times, using the power assembly box, beautiful and practical do not have to talk about.